This product is no longer available. Please click here for alternatives.

5347B Foam Board 5mm Standard 762mm x 508mm 25 sheets

Bright white foam board with a neutral pH

Standard foam core board is light, durable and flat with good structural strength. It is suitable for many framing, display, photo, presentation and hobby tasks.

Standard foam board make up:

+ Face: Super smooth clay-coated paper

+ Core: High-density polystyrene foam non-toxic, CFC free

+ Back: Super smooth clay-coated paper

+ Thickness: 5mm  Sheet size: 762mm x 508mm  pack 25

Standard boards have a polystyrene foam core which is extruded, loosely rolled up and left in a store to allow it to out-gas. Specially formulated EVA based emulsion adhesives permanently bond the polystyrene foam core to the paper liners.

Click here for more foam boards.

More info:

Store foam boards flat in an area where the temperature doesn’t fluctuate too much to ensure they don't bow.

Delivery notice: This item cannot be shipped overseas due to its dimensions and/or weight.

What is Foam Board?

+ Face papers sandwiching the high-density polystyrene foam core form a board which is lightweight yet flat and rigid. It has numerous uses in art, picture framing, photo mounting, graphics display, merchandising and more.

+ Most foam boards are CFC free, pH neutral and with no toxins or harmful substances. There are many variations, to make it more moisture resistant, more rigid or coloured. Also, pressure-sensitive and heat activated adhesive types.

How is Foam Board made?

+ The polystyrene foam core is extruded, loosely rolled up and left in a store to allow it to out-gas. Then the paper or similar liners are bonded to each face – all at very high speed!

+ After the boards have been laminated, they are dried, cooled and trimmed to size with an automated cutter.

Tips for using Foam Board

Foam board can be cut with almost any sharp scalpel or knife blade. For best results use a safety straight edge and a cutting mat. Foamwerks cutting tools are recommended for cutting custom shapes for use in object framing and modelling.

Sheet material cutters such as Keencut Simplex and Evolution3 will improve workshop efficiency when cutting larger volumes. CMC mounters cutters can usually cut foam board up to 5mm. On Gunnar cutters use the 001013n blade, 7026B.

Y11