2106
Daler STANDARD 2.0mm Self adhesive board 1 sheet

£11.20 Ex Vat

In Stock (30 available)

See more products in the following ranges:

Volume Discounts

5 items or more £9.86

Description

2106 Daler STANDARD 2.0mm Self adhesive board 1 sheet

Grey core board coated on one face with a cold, sticky, pressure-sensitive adhesive. Protected with a release paper, overprinted dark grey with instructions. Ideal for mounting many kinds of lightweight, low value prints

Use with care, follow instructions on release paper. Use with a brayer roller or roller laminator.

This STANDARD self-adhesive is 2.0mm thick. Sheet size: 1120mm x 815mm / 44" x 32"

Full pack quantity is 5 sheets. Made in UK. Use is not advised when the mounted print is to be varnished.

With self-adhesive boards, always peel back a little bit of release paper and align the item to be mounted. Then peel back more and press down as you go. Use a brayer roller to bond it down fully, rolling all over in both directions. The acrylic adhesive develops full bond over two days.

2106  Daler STANDARD Self-adhesive 2.0mm  

See also:

2104  Daler STANDARD 1.4mm Self-adhesive board  1 sheet

5014  Daler XTRA-TAK 1.4mm Self-adhesive board  1 sheet

3144  Brayer roller 200mm / 8”

LION Mixed Mountboard Despatch, LMMD: Ordering mountboards from LION is easy - you don't have to order full packs. Mix and match from all our mountboards and a range of other sheet materials.

Working with self-adhesive materials in cold weather? When the temperature drops remember to let self-adhesive tapes, PVA glues, boards and mounting films come up to room temperature before using them. Keep them that way for a few hours after application while the adhesives cure.

Product information updated May 2020

Questions

Please feel free to ask any questions about this product.

0 Questions

Ask a question

Specification

TypeMountboards
ColourGrey
Quantity1
Depth2mm
ForMounting
BrandDaler
Width815mm
Length1120mm