734 Bondloc Dry PTFE Lubricant 400ml

Essential for mount cutter maintenance

Regular calibration and cleaning of your mountcutter is essential. Always keep it covered with a cloth when not in use, this will keep off the dust which settles overnight.

Keencut mountcutters should only be cleaned with a dry cloth and vacuum. Stubborn marks may be removed with a damp cloth with a little detergent.

To clean Fletcher-Terry and C&H cutter bars use lighter fluid. Lay a piece of scrap board under the running rail to protect the baseboard and squirt fluid over the rail. Work in with tissue paper and clean off all the accumulated dirt.

When dry, spray Bondloc Dry PTFE Lubricant onto the rail and work the head up and down before cleaning off all the excess. Use this also in the chute of your underpinner, etc. Silicone free.

Delivery notice: This item is classed as flammable and therefore cannot be shipped overseas.