ColourMount THICK TAK 3mm Self adhesive board 1200 x 1000mm 1 sheet

£9.76 Ex Vat

In Stock (33 available)

See more products in the following ranges:

Volume Discounts

5 items or more £8.59


7020 ColourMount THICK TAK 3mm Self adhesive board 1200 x 1000mm 1 sheet

Unique combined self-adhesive mounting and backing board. Bond the print on paper to the self-adhesive face, trim to size and fix in the frame. Tape for neatness and job done!

Face: The face has standard tack self-adhesive with a release paper. 

Core: The core is 3mm thick grey pulp board core, meeting PEFC standards.

Backing: The back has a lining of brown kraft paper, which gives an attractive look to the back of the framed art.

Thick Tak is 3mm thick. Sheets: 1200mm x 1000mm / 47" x 39"  Full pack is 10 sheets

With self-adhesive boards, always peel back a little bit of release paper and align the item to be mounted. Then peel back more and press down as you go. Use a brayer roller or roller laminator to bond it down fully. The acrylic adhesive develops full bond over two days.

See also:

9518  ColourMount WHITE Core self-adhesive board 1.2mm  1 sheet

9519  ColourMount WHITE Core self-adhesive board 2.4mm  1 sheet

3144  Brayer roller 200mm / 8”

More info:

LION Mixed Mountboard Despatch, LMMD, to your workshop: We send 10 sheets or more of any mix of mountboard from our Value, Canson, Daler and Colourmount ranges plus some other boards. Click for full info. We are sorry, but these ColourMount Thick-Tak sheets are too large for our LMMD service. Check with our sales team. 

Collect from the LION Trade Counter: Buy any quantity of any mountboards at our trade counter in Birmingham. Pre-order using ‘Click & Collect’ to speed your visit and save money. While having a coffee do browse the wonderful range of LION Mouldings. To try framing equipment, please check in advance that our expert will be here to help you.

Working with self-adhesive materials in cold weather? When the temperature drops remember to let self-adhesive tapes, PVA glues, boards and mounting films come up to room temperature before using them. Keep them that way for a few hours after application while the adhesives cure.

Product information updated May 2020


Please feel free to ask any questions about this product.

0 Questions

Ask a question


MaterialWood Pulp