7020

3mm ColourMount 2 in 1 Self Adhesive Backing Board 1200mm x 1000mm 1 sheet

Discontinued - now only available in packs of 5. See 7020B.

7020 3mm ColourMount 2 in 1 Self Adhesive Backing Board 1200 x 1000mm 1 sheet

Save Time - Eliminates The Need For Using A Seperate Backing Board When Framing 

Bond the print on paper to the self-adhesive face, trim to size and fix in the frame. Tape for neatness and job done!

Face: The face has standard tack self-adhesive with a release paper. 

Core: The core is 3mm thick grey pulp board core.

Backing: The back has a lining of brown kraft paper, which gives an attractive look to the back of the framed art.

Thick Tak is 3mm thick. Sheets: 1200mm x 1000mm / 47" x 39" 

With self-adhesive boards, always peel back a little bit of release paper and align the item to be mounted. Then peel back more and press down as you go. Use a brayer roller or roller laminator to bond it down fully. The acrylic adhesive develops full bond over two days.

Working with self-adhesive materials in cold weather? When the temperature drops remember to let self-adhesive tapes, PVA glues, boards and mounting films come up to room temperature before using them. Keep them that way for a few hours after application while the adhesives cure.

Mixed Sheet Despatch: Ordering sheet material from LION is easy, you don't have to order in full packs. Mix and match single sheets of mountboard and other selected sheet materials. You just need to order a mixture of at least ten sheets in total.