OPEN we are taking orders for delivery
Cold Mounting Film Twin Release 1040mm x 25m roll
£148.60 Ex Vat
In Stock (9 available)
6979 Cold Mounting Film Twin Release 1040mm x 25m roll
Twin-release film by SeaLion is the easiest type of cold mounting film to use with a brayer roller, a manual roller laminator or a powered roller laminator
It is easily handled as cut pieces, with less risk of it picking up dust.
It is made up of: Release paper + 25µ adhesive + 50µ base clear film + 25µ adhesive + Release paper. 100µ thick, not including release papers.
Cut to size you require and apply one face to the mounting board, peeling the release paper as you lay it down on the board. Then peel up and fold back a narrow strip along one edge of the second backing paper. Carefully position the print.
Finally, peel up the release paper and smooth down the print as you go. Use a brayer roller to squeeze out air bubbles. A roller laminator speeds the task.
Ideal for mounting prints onto substrates including foam board, acrylic, aluminium composite, MDF and most clean, flat, grease free surfaces.
• Clear 50μ base film, coated on both sides with a UV and blanch resistant permanent pressure-sensitive adhesive
• Adhesive will build to maximum strength over 24-48 hours
• Release liners are 120gsm PE coated and silicone coated paper
6979 Cold Mounting Film Twin release roll 1040mm x 25m
6977 Cold Mounting Film Twin release roll 648mm x 25m
6980 Cold Mounting Film Twin release roll 1300mm x 25m
3143 Brayer roller, rubber 100mm
6271 EasyMount 650 Power Cold Laminator
Click here to see the full range of cold mounting films
Click here to learn how to mount and laminate a paper print
Product information updated September 2020
Please feel free to ask any questions about this product.
Ask a question