£1,069.00 (ex VAT)
Available to order.
Lead time approx. 3 working days.
Contact sales team for further info.
A future-proof cutting solution with maximum flexibility for use in a production facility. Evolution E2 cuts and trims the output of most sizes and types of roll feed or flatbed printer. Handles flags, banners, card, PVC Foamboard up to 6mm, foamcore and much more.
Available to order if out of stock, lead time typically 7-10 working days from order confirmation.
An integrated wide-format cutting system designed to revolutionise the speed, accuracy and convenience of the print finishing process.
The Evolution E2 sheet material cutter cuts within 0.2mm of a straight line, this means fewer mistakes and less waste. Delivered pre-calibrated and checked for straigtness along the length of the cutter.
One of the largest wide-format sheet cutters available on the market, capable for cutting large items accurately.
Twin cutting head
The Keencut E2 is supplied with four blade holders as standard:
2 x Graphik, for maximum flexibility and two direction cutting
1 x medium duty, for general purpose materials
1 x rotary blade holder, for textiles, paper and other delicate materials
Choose two blade holders at a time and change quickly and easily between two different settings.
Integrated cutting strip
No seperate cutting mat needed, the strip supports the material being cut for a superior cut.
Safety in mind
Magnetic blade holders helps to prevent blades being dropped. Blade holders are spring loaded, blades are retracted when no pressure is applied. Safer than a hand held blade and straight edge as there's no chance of them becoming detached.
Store when not in use
The cutter flips forwards 270°, hanging at a right angle in front of the bench. The work surface can then be used for other purposes when the Keencut E2 is not in use. Make full use of work space without the lengthy process of removing the cutter.
Unique clamping system
The whole clamp is raised by pulling the level at either end, leaving both hands free for positioning the material. Once lowered the soft silicon fitted to the underside protects and grips the media being cut.
The cutting blade can be adjusted to the correct depth. If it's too shallow the cut will be incomplete, if too deep the blade will flex.
Mounts to most bench surfaces with brackets specially designed to optimise alignment. The Keencut Big Bench is ideal.
E2 comes complete with 4 blade holders:
1 x Medium Duty
2 x Graphik
1 x Fabric
Please contact Jack Siwinski firstname.lastname@example.org if you would like more details.
Please feel free to ask any questions about this product.
Keencut Evolution E2 Product Brochure
Keencut Cutter Selection Guide
LION Keencut Comparison Table Jan 2018
|Type||Sheet material cutters|
|For||Cutting sheet materials|