Lion Enduro Gold TiN Blades 0.38mm Single Edge 100 pieces

£29.68 Ex Vat

5 available Discontinued when out of stock

See more products in the following ranges:


7446 Lion Enduro Gold TiN Blades 0.38mm Single Edge 100 pieces

A breakthrough in mountcutter blades.

High quality 1.25% carbon steel, precision ground and honed super sharp in Sheffield.

Each blade is sputter coated in an ultra high-vacuum process with very hard Titanium Nitride. This gold surface makes the blade edge cut well for around three times longer.

In two standard thicknesses, 0.012"/0.32mm and 0.015"/0.38mm, both in Normal, ground both sides, and Single Edge. Packed in wraps of 5 blades, 100 in a box.

Lion Enduro Gold blades help you save on blade cost and on time taken changing blades. They fit many mount cutters including Keencut, Fletcher, C&H and the Logan Platinum Edge.

0.015"/0.38mm thick, Single Edge, box of 100

These mountcutter blades are not oiled, which is the case with most mountcutter blades. This removes the chance of smudges of oil appearing on the mount bevel if a blade has not been properly cleaned prior to use. They go through a cleaning/degreasing process before they are sealed in the cellophane sleeves. However, the absence of any oil makes them vulnerable to surface corrosion in damp or humid environments. 

To help minimise the chances of corrosion happening, here are some guidelines:

+ When opening a pack of blades, place the opened (but resealed) box in a small sealable plastic box with a silica gel sachet inside. You can often save silica gel sachets from other product packaging. 

+ Only open one cellophane pack at a time. You probably do this anyway.

+ Consider storing full boxes again in a sealable tub with silica gel. 

If some signs of corrosion are seen on a blade it will not affect the quality of the cut providing the corrosion is not on the tip being used.


Please feel free to ask any questions about this product.

0 Questions

Ask a question


ForCutting mountboard