9952 Locator Disc for Installing Square Wire Press Fix Sockets

Sockets for the Photo Frame Stands are a key part of the Square Wire Frame Stand system

Press-fix Sockets for stands are fixed onto the frame backing board with a manual press. Often two are fitted to allow the frame to stand either way.

The Locator Disc for Press-fix sockets drops into the SH200 Press. Lay Press-fix Sockets, spikes-up, into the Locator Disc. Adjust the back gauge and the hammer pressure to suit the backing board. The production rate can be very high.

Locator Disc is 90mm diameter, 5.16mm thick, with slot for inverted Sockets. Steel, zinc plated. Made in UK.

Clip-on Sockets for stands fit onto the edge of the frame backing board and the user can move it to suit the frame standing either way.

Photo Frame Stands fit into the sockets. They sit flat against the back for packing and transit. Customers simply lift the Stands out of the sockets, turn and re-insert to make the frame stand.

Square Wire Photo Frame Stands come in Small, Large and Gallery sizes and in Black, Silver or Brass finishes. Varying sizes of frames and widths of moulding make it important to check which Stand works best on any particular frame. Use the Trial Pack.

Large and Gallery frame stands are of a similar length with the Gallery stand shaped to be a better match for frames with wider mouldings.

See also

9946A Photo Frame Stand Sockets Press Fix Silver pack 100

9946C Photo Frame Stand Sockets Press Fix Silver pack 500

4822A Photo Frame Stand Sockets Press Fix Black pack 100

4822C Photo Frame Stand Sockets Press Fix Black pack 500