9201A CWH5 Angled Micro Sawtooth Picture Hangers pack 50

The unique feature of CWH5 Angled picture hangers is that the micro-sawtooth lower edges are slightly angled

Two CWH5’s are fitted, one on each side of the picture frame, near the top. The frame then hangs directly on two hooks, screws or nails in the wall. Once in place, nudging the frame a little bit side-to-side levels it. And it stays level.

This pack of 50 is enough to hang 25 picture frames. A pair can take a frame up to around 5kg, subject to quality of installation of hooks.

Use 3.0mm or 3.5mm dia screws to fix the CWH5 Angled hangers to the picture frame moulding. The pressed-in dots help when measuring the spacing between the hangers for working out the positioning of the hooks on the wall. It can be helpful to use Post-its and mark them, not the wall – nail through them and tear off.

CWH5 Angled hangers are 46mm x 50mm, 1mm steel, zinc plated. Holes / slots are 4.0mm.

CWH5 Angled picture hangers are not designed to be used singly nor to work with cord or wire.

See also:

Pozidrive / cross head woodscrews

Slotted woodscrews

Frame bumpers

V Hooks

Picture Hooks

More info:

Registered Design: LION CWH Hangers are subject to Registered European Community Design No. 00746 3690 - 0001

Z01