This product is no longer available.

10274 MountCor Dry Mount Adhesive Foamboard 5mm 1016mm x 813mm 1 sheet

Lower temperature heat activated adhesive foamboard for mounting of art on paper

MountCor bonds at around 65°C. The temperature is much lower than most other heat-activated adhesive materials. Dwell time around 65 seconds.

- The specially formulated MountCor adhesive is acid-free, inert and designed for long-term preservation of the art. The bond is permanent with no risk of lifting over time.

- Each board has its own single-use translucent release paper which guarantees no debris or left-over adhesive gets onto the print. The printed grid helps accurate alignment of the art to speed trimming.

- Gilman Brothers both manufacture the high-density foamboard and coat it in their family-owned plant in US which guarantees consistent quality. The rigid 5mm foamboard has a super smooth surface and is coated with the special heat-activated adhesive using special air-release technology to eliminate any ‘orange peel’ effect. That is something which is often found with pup core boards.

- MountCor works with most heated flat-bed and vacuum presses as well as with heated roller presses.

- MountCor is safe for mounting most artwork on paper. The lower bonding temperature greatly reduces risk of the artwork image being damaged. It can be safely used for mounting:

• Posters and prints, litho printed

• Digital prints and prints from toner copiers, laser printers and plotters

• Water borne, solvent, UV and latex inkjet inks

• Resin coated and digital photo papers

• Polyester encapsulated charts and maps

MountCor is white, 5mm thick high-density foam board with a one-time use translucent release paper to keep the adhesive surface clean.

Sheets are 1016mm x 813mm.

Mixed Sheet Despatch: Ordering sheet material from LION is easy, you don't have to order in full packs. Mix and match single sheets of mountboard and other selected sheet materials. You just need to order a mixture of at least ten sheets in total.