9953H CJ Paste Corner Filler Teak 50ml tube

CJ Paste for filling joins and cracks in moulding

It has the texture of thick cream and can be painted into place with a small stiff artists brush. The end of a finger also works well. It is best suited to quickly filling narrow gaps. CJ Paste comes in a range of colours and metallics.

Using CJ Paste:

Squeeze a dab on your finger or brush and paint or push into the gap line. Aim for a thin even coat. Allow to go off until it has a dull flat appearance. With a slightly damp cloth, microfibre cloths are ideal, carefully wipe off the excess.

Always wipe across the line, never along it, to avoid wiping it out of the gap. Apply multiple layers if required. When fully dry, buff with a dry cloth.

+  In 50ml tubes, with air-tight closures

+  Water based and easy to clean up with damp cloth

+  No polishing effect on moulding that can happen with wax fillers

+  Dries semi-hard in around 5 minutes

+  A small brush can help you apply CJ Paste

+  After drying it can be sanded and painted. It is flexible & should not crack

+  Mix CJ Paste colours on a piece of board to get a better match

+  Can be shipped internationally as it is water based

+  Made in Australia