Mountcutter Blades Normal 0.015" 100 pack

£14.38 Ex Vat

124 available Discontinued when out of stock

See more products in the following ranges:


1930A Mountcutter Blades Normal 0.015" 100 pack

Fine quality mountcutter blades precision made from 1.5% carbon steel in Sheffield, England.

Suit most mount cutters which use rectangular blades, including KEENCUT, C&H & FLETCHER. Also fit RAPIER, ART MAC, SIGNATURE etc.

0.015"/0.38mm thick, Normal, box of 100

These mountcutter blades are not oiled, which is the case with most mountcutter blades. This removes the chance of smudges of oil appearing on the mount bevel if a blade has not been properly cleaned prior to use. They go through a cleaning/degreasing process before they are sealed in the cellophane sleeves. However, the absence of any oil makes them vulnerable to surface corrosion in damp or humid environments. 

To help minimise the chances of corrosion happening, here are some guidelines:

+ When opening a pack of blades, place the opened (but resealed) box in a small sealable plastic box with a silica gel sachet inside. You can often save silica gel sachets from other product packaging. 

+ Only open one cellophane pack at a time. You probably do this anyway.

+ Consider storing full boxes again in a sealable tub with silica gel. 

If some signs of corrosion are seen on a blade it will not affect the quality of the cut providing the corrosion is not on the tip being used.


Please feel free to ask any questions about this product.

0 Questions

Ask a question


ForCutting mountboard