2848 Disc Plate Hangers 75mm diameter pack 10

A disc plate hangers bonds to the back of a ceramic plate so that it hangs flat and secure against the wall and cannot be seen. No clips or hooks. An invisible answer to ugly wire plate hangers.

Safety Assured - Disc Hangers give a permanent bond of great strength to glazed and unglazed surfaces. The bond will not ‘age-harden’ nor deteriorate with time. It is unaffected by any normal household extremes of temperature or humidity.

Easy Removal - The bond of Disc Hangers is removed completely by soaking in warm water. Back stamp and other markings are undisturbed, yet no adhesive residue is left.

The original Disc Invisible Adhesive Plate Hangers have been tested and proven over 65 years. They are designed to work on smooth and very clean ceramic surfaces. Use the largest Disc hanger which fits the flat area. They can be trimmed with scissors.

Old plates can acquire a layer of dust, atmospheric pollution and airborne grease over time. This must be scrubbed clean with soap and water. Try not to use detergent as most contain surfactants. Finally, wipe the surface with a strong solvent like methylated sprits which removes any trace of grease and surfactants.

Wet the hanger disc thoroughly in a saucer of clean water and rub lightly with finger to activate the adhesive. Apply to the plate and let dry overnight, then check that the bond is secure before hanging the plate on a suitable hook or screw on the wall.

Disc Hangers will also stick well to foamboard panels to hang them on picture hooks. The large contact area spreads the loading and reduces the risk of delamination.

Disc Hangers are available in five sizes, individually carded, 10 in a pack. Made in UK.

Click here for Traditional Wire & Spring Plate Hangers

Click here for Bumpers which can improve plate stability and protect the wall

Y10