3008
Keencut Tech D Blades 0.015” Double Edge 100 pieces

£24.06 Ex Vat

In Stock (14 available)

See more products in the following ranges:

Description

3008 Keencut Tech D Blades 0.015” Double Edge 100 pieces

Double edge, D, blades are ground on both edges – so ideal for cutting thicker, softer, boards.

They are 0.015” / 0.375mm thick. Keencut product code: #CA50-020

  • Double ground edge 0.015” / 0.375mm thick. ‘Pointed edge’
  • 1.25% Carbon surgical steel
  • High strength for increased durability and reduced blade tip damage
  • Oil-free to ensure no marking of boards when first used
  • Made in Sheffield, England

Made specially for Keencut. TECH D rectangular blades fit the ACE and all ULTIMAT models. Also, thevertical cut on FUTURA. Use also for bevel cutting standard mountboard on Ultimat Gold, Ultimat Futura and Futura Flexo.

Also use for bevel cutting standard mountboard on Ultimat, Artist+, Ace+ and Ace.

3008  Keencut Tech D Double edge blades, 0.015" / 0.375mm  Box 100

Note: In Lion56 catalogue, p.27, 3008 blades are incorrectly numbered as 3845. Whoops, us!

See also:

2493  Keencut Tech D 0.012” / 0.30mm   Double edge  Box 100

3845  Keencut Tech S 0.012" / 0.30mm   Single edge    Box 100

Note: In Lion56 catalogue, p.27, 3845 blades are incorrectly numbered as 3008. It happens!

6162  Keencut Tech S 0.015" / 0.375mm  Single edge   Box 100

Double edge blades are ground on both sides, to come to a point. Single edge blades are ground on one side only, like a chisel. 

These Keencut mountcutter blades are not oiled, which is the case with most blades packed for mountcutting. No oil removes the chance of smudges of oil appearing on the mount bevel if a blade has not been properly cleaned prior to use. They go through a cleaning/degreasing process before they are sealed in the cellophane sleeves.

However, the absence of any oil makes them more vulnerable to surface corrosion in damp or humid environments. To help minimise the chances of corrosion happening, here are some guidelines:

+ When opening a pack of blades, place the opened (but re-sealed) box in a small sealable plastic box with a silica gel sachet inside. You can often save silica gel sachets from other product packaging.

+ Only open one cellophane pack at a time. You probably do this anyway.

+ Consider storing full boxes again in a sealable tub with silica gel.

If some signs of corrosion are seen on a blade it should not affect the quality of the cut providing the corrosion is not on the tip being used.

Download:

Keencut Ultimat Futura product info

Product information updated February 2020

Questions

Please feel free to ask any questions about this product.

0 Questions

Ask a question

More Info

Download this document

PUB068 Keencut Ultimat Futura

1.82 MB

Download

Specification

TypeBlades
Quantity100
Length45mm
ForCutting sheet materials
Depth0.38mm
BrandKeencut