386 Display Mount 3M Spray Adhesive 400ml

Strong and instant long-term bond for heavy paper, board, fabrics and some metals

Always read instructions on the Display Mount can carefully before use. Use firm roller to ensure strong bond - work from centre outwards. Brayer roller is ideal. Bond within five minutes of application. Moisture in the board or print can cause cockling and bond failure.

Hard surfaces must be clean and grease-free. Substrates such as hardboard, fibreboard, particle board and low-quality cardstocks such as grey board may sometimes contain sufficient oil to cause softening of the adhesive which can result in bond failure.

Can be reversed with lighter fluid.

Can: 293g / 400ml

Delivery notice: This item is classed as flammable and therefore cannot be shipped overseas.

See also:

7739 Extra Strong Spray Adhesive

3144 Brayer roller

502 Lighter Fluid

Working with self-adhesive materials in cold weather? When the temperature drops remember to let self-adhesive tapes, PVA glues, boards and mounting films come up to room temperature before using them. Keep them that way for a few hours after application while the adhesives cure.