6919 Heavy Duty Tape 19mm x 25m 1 roll

For attaching Sub-frames to printed aluminium panels and printed panels into Tray Frames

Use: Fixing sub frame to non-porous panels e.g. Aluminium, ACP.

Benefits: Very high grab, solid adhesive.

Heavy Duty Tape is double-sided with very high bond strength. Is had good tack and an extremely high adhesion to most grease-free substrates.

Made of a synthetic rubber/resin adhesive with a tearable polyester fabric core. It is approximately 0.80mm thick.

This special tape is primarily to help users bond our Sub-Frame Profiles to aluminium, Di-bond and other panel materials. It's also ideal for fixing many objects and memorabilia to smooth and textured surfaces.

Stronger than foam-based tapes, which can shear under stress. We've not yet tested removal, which won’t be easy - we suggest trying lighter fluid or acetone.

As with most adhesive products, Heavy Duty Bonding Tape works best if the surfaces to be bonded are totally clean and grease free. That includes finger grease. Always use solvent surface wipes.

Heavy Duty Bonding tape colour  It usually looks red on the roll. The adhesive is clear and the colour comes from the filmic liner. For technical reasons, it sometimes comes with a paper release liner, so the rolls look white. The superb adhesive is identical in both cases.

Working with self-adhesive materials in cold weather? When the temperature drops remember to let self-adhesive tapes, PVA glues, boards and mounting films come up to room temperature before using them. Keep them that way for a few hours after application while the adhesives cure.