10673 Liberon Superior Danish Oil with UV Filters 500ml

Liberon Danish Oil penetrates into the wood to bring out the natural grain of the timber and provide a satin to gloss sheen

- Minimum 5 hours to dry

- Added UV filter for protection against sunlight

- Water, heat & alcohol resistant

- Moderate odour level

Feeds and protects hard and softwoods with UV filters. Liberon finishing oil has added UV filters help prevent discolouration from the sun, as well as being water, heat and alcohol resistant. Liberon Danish Oil is suitable for both interior and exterior use.

Before applying ensure the bare wood moulding is bare. Remove any wax finishes with Liberon Wax and Polish Remover and any varnish finishes with Liberon Fine Wood Stripper. Clean, dry and ensure the surface is dust free. If required stain the wood with Liberon Palette Wood Dye before oiling.

Application

Apply Liberon Finishing Oil with a brush or lint-free cotton cloth and wait for 5 to 10 minutes before wiping excess off with a clean lint-free cloth. Allow to dry for a minimum of five hours before apply more coats as required. A minimum of three coats is usually recommended. For best results gently rub with Liberon Steel Wool between coats. In damp areas, such as kitchens and bathrooms, more coats will be required to ensure adequate protection.