3461 RabbetSpace Rebate Extender RS 12 pack 10.6m

The RabbetSpace Rebate Extender Strips should be mitre cut then fixed with the small screws

This is a pack of seven strips of RS12, each 1.524m long, 10.6m total.

The wooden cutting Support Bars are in 3mm, 6mm, 10mm and 13mm thicknesses to support the appropriate RabbetSpace strips while they are being mitre cut. The Support Bars are the same as the extra rebate height each of the RabbetSpace profiles gives. A pack has one bar of each thickness, 267mm long.

RabbetSpace Extender Strips are extruded from acid-free black acrylic with a satin finish. Lengths are 1.524m and each full pack of seven strips comes with 150 of the special small black screws. 

The RabbetSpace strips can be mitre cut with a sharp knife, a small hand saw, a slip cutter or a Morso mitre guillotine. In all cases, using a piece of support bar to steady the RabbetSpace profile helps make a better cut.

RabbetSpace strips are fixed using special small black screws in pre-drilled holes. The two-stage bit combines two drills. One makes a 1.5mm hole in the RabbetSpace the size of the shank of the screw and the other makes a smaller hole of the right depth in the moulding. Use it with an electric screwdriver.

RabbetSpace Rebate Extender Strips RS12 1.524mm x 7  10.6m pack total 

Delivery notice: This item cannot be shipped overseas due to its dimensions and/or weight.