3457
RabbetSpace Rebate Extenders Trial Kit 12m Total with Screws

RabbetSpace Rebate Extenders Trial Kit 12m Total with Screws
£66.19 Ex Vat
In Stock (3 available)

Quantity

3457 RabbetSpace Rebate Extenders Trial Kit 12m Total with Screws

The RabbetSpace Rebate Extender Strips should be mitre cut then fixed with the small screws

The wooden cutting Support Bars are in four thicknesses to support the appropriate RabbetSpace strips while they are being mitre cut.

The cutting Support Bars are 3mm, 6mm, 10mm and 13mm thick, which are the same as the extra rebate height each of the RabbetSpace profiles gives. A pack has one bar of each thickness, 267mm long.

RabbetSpace Extender Strips are extruded from acid-free black acrylic with a satin finish. Each full pack of strips comes with 150 of the special small screws. 

The RabbetSpace strips can be mitre cut with a sharp knife, a small hand saw, a slip cutter or a Morso mitre guillotine. In all cases, using a piece of support bar to steady the RabbetSpace profile helps make a better cut.

RabbetSpace profiles are fixed using special small black screws in pre-drilled holes. 

The two-stage bit combines two drills. One makes a 1.5mm hole in the RabbetSpace the size of the shank of the screw and the other makes a smaller hole of the right depth in the moulding. Use it with an electric screwdriver.

3457  RabbetSpace Trial Kit: 2 x 1.5m lengths of each RabbetSpace profile. With cutting support bars two-stage drill bit, screwdriver bit and screws

Downloads

PUB105 FrameSpace.pdf - 1.02 MB

Download

PUB069 Framespace and Econospace.pdf - 3.01 MB

Download

Questions

Please feel free to ask any questions about this product.