DELIVERY just £9.95
10523 Kool Tack 1.4mm Dry Mount Adhesive Pulp Board 1020mm x 810mm 1 sheet
![Kool Tack 1.4mm Dry Mount Adhesive Pulp Board 1020mm x 810mm 1 sheet](https://lionpic-cdn.b-cdn.net/products/10523/kool-tack-1.4mm-dry-mount-adhesive-board-10523-01.jpg?class=large)
![Kool Tack 1.4mm Dry Mount Adhesive Pulp Board 1020mm x 810mm 1 sheet](https://lionpic-cdn.b-cdn.net/products/10523/10523-10524-Kool-Tak-Dry-Mount-Adhesive-Foam-Board-Layers.jpg?class=large)
10523 Kool Tack 1.4mm Dry Mount Adhesive Pulp Board 1020mm x 810mm 1 sheet
Speed up your dry mounting by using Kool Tack
Dry mounting with heat activated adhesive bonds art on paper to a mounting board. The print stays flat and humidity cannot cause rippling.
Kool Tack has the pH neutral heat-activated adhesive ready coated onto the 1.4mm smooth pulp mounting board. The adhesive is low-tack when cold.
Manufactured in USA by Kool Tack this dry mounting board can reduce process time by comparison with using dry mounting tissue. The heat activated adhesive works best with art on smoother papers.
Papers and thin card bond to it at lower than normal temperatures. The heat activated adhesive works with most heated flat bed, mechanical and vacuum presses. Use Kool Tack for general mounting work in picture framing workshops, display studios and similar.
Specifications:
+ Face has a white paper liner coated with the heat-activated acid-free pH neutral adhesive. This helps long term preservation of the artwork
+ Core is solid wood pulp off-white, buffered with CaCo3 to pH 7.7 – 8.5
+ Board thickness: 1.4mm
+ Board size: 1020mm x 810mm
+ Back is white paper
+ Kool Tack adhesive has a short dwell time of around 30-45 seconds, quicker than some other boards. Works with most heated flat bed, mechanical and vacuum presses. The lower bonding temperature of 75°C helps minimise rippling of the art during bonding of paper and occasional discoloration of inks. Both settings will be determined with experience.
+ Kool Tack is reversible and can often be re-used up to three times with care. This gives peace of mind and can reduce wastage should errors occur.
+ The adhesive surface has minimal tack at room temperature, helping to minimise dust accumulating on the surface during storage. Kool Tack boards should be stored flat, covered, at room temperature and average humidity.
On the Crescent quality scale, 10523 is rated GOOD. Kool Tack ref: KT3240W Made in USA
See also:
Silicone release papers and films
‘The Mounting and Laminating Handbook’ by Chris Paschke
A07
Mixed Sheet Despatch: Ordering sheet material from LION is easy, you don't have to order in full packs. Mix and match single sheets of mountboard and other selected sheet materials. You just need to order a mixture of at least ten sheets in total.
Downloads
Mixed Sheet Despatch.pdf - 216.63 KB
Also in the Range View Range
More Like This
Questions
Please feel free to ask any questions about this product.