10524 Kool Tack 2.5mm Dry Mount Adhesive Pulp Board 1020mm x 810mm 1 sheet

Speed up your dry mounting by using Kool Tack

Dry mounting board with heat activated adhesive helps bond art on paper. The print stays flat and humidity cannot cause rippling.

Kool Tack has the pH neutral heat-activated adhesive ready coated onto the 1.4mm smooth pulp mounting board. The adhesive is low-tack when cold.

Manufactured in USA by Kool Tack this dry mounting board can reduce process time by comparison with using dry mounting tissue with mounting board. The heat activated adhesive works best with art on smoother papers.

Papers and thin card bond to it at lower-than-normal temperatures. The heat activated adhesive works with most heated flat bed, mechanical and vacuum presses. Use Kool Tack for general mounting work in picture framing workshops, display studios and similar.

+ Face has alpha cellulose extra smooth white paper coated with heat-activated dry adhesive pH neutral for long life.

+ Kool Tack adhesive has a short dwell time of around 30-45 seconds, quicker than some other boards. Works with most heated flat bed, mechanical and vacuum presses. The lower bonding temperature of 75°C helps minimise rippling of the art during bonding of paper and occasional discoloration of inks. Both settings will be determined with experience.

+ Core is wood pulp, off white. Acid and lignin free, pH 8.0 – 8.5. Pulpboard absorbs more adhesive than clay coated boards.

+ Back has alpha-cellulose white paper liner

+ Board thickness: 2.5mm

+ Board size: 1020mm x 810mm

+ Kool Tack is reversible and can often be re-used up to three times - giving peace of mind and reducing wastage should errors occur.

+ The adhesive face has minimal tack at room temperature, helping to minimise accumulation of dust on the surface. Kool Tack boards should be stored flat, covered, at room temperature and average humidity.

+ Easy to cut to size with wall-mounted blade cutters

On the Crescent quality scale rating, 10524 is rated GOOD. Kool Tack ref: KTAF3247  Made in USA.

See also:

Silicone release papers and films

‘The Mounting and Laminating Handbook’ by Chris Paschke

A07

Mixed Sheet Despatch: Ordering sheet material from LION is easy, you don't have to order in full packs. Mix and match single sheets of mountboard and other selected sheet materials. You just need to order a mixture of at least ten sheets in total.